EDDY CURRENT TESTING
eddy current testing course in trichy, eddy current testing services in trichy, When a magnetic field cuts through metal, a current is induced. If a magnetic field cuts a wire in a closed circuit, a current is induced round the circuit. However if a magnetic field cuts through a sample of metal that is not connected to a circuit, an 'Eddy Current' is produced. This Eddy Current is localised in the metal, and has a flow pattern. The flow pattern is disturbed by discontinuities from the surface to a shallow depth of penetration. The method is quick and very sensitive. No contact with the metal is required. All metals may be subject to this form of testing.
We can provide Eddy Current training suitable for PCN/EN473/ISO 9712 Levels 1, 2, and 3, and ASNT Level 3. Alternatively we can provide training suitable for candidates working to an employer written practice based on SNT-TC-1A; EN4179 and NAS410. Eddy Current Testing is separated into three specific product sectors for certification purposes: Welds, Wrought Products (Forgings), and Tubes.
Below is an example of a syllabus that is used for Eddy Current training courses (we can make changes to a syllabus to satisfy the requirements of a specific written practice if necessary):
Level I
General Theory:
- Brief History of Testing
- Basic Principles of Testing
- Generation of Eddy Currents by means of an AC field
- Effect of fields created by Eddy Currents
- Effect of change of impedance on instrumentation
- Terminology and units
- Principles of magnetisation.
- Magnetisation
- electromagnetism theory
- Flux leakage theory and principle
- Readout Mechanism
- Types of Eddy Current Sensing Elements
- Types of Flux Leakage Sensing Elements
- Safety as applicable to Eddy Current Testing and Electrical Safety
Specific Theory:
Application of the Method and use of Codes, Specifications and Procedures, applicable to the Company, including the relevant control checks.
Level II
General Theory:
- Review of Electromagnetic Theory
- Factors that affect Coil Impedance
- Factors that affect Flux Leakage Fields
- Signal-to-Noise Ratio
- Selection of Test Frequency
- Selection of Method of Magnetisation for Flux
- Leakage Testing
- Coupling
- Field Strength and Its Selection
- Field Orientation for Flux Leakage Testing
- Instrument Design Consideration
- Safety as applicable to Eddy Current Testing and Electrical Safety
General Theory:
Application of the Method to the Specific requirements of the Company, in particular making reference to those Codes, Specifications and Procedures used by the Company, including the relevant control checks.
Coding for ET Training Courses
INTRO/PRAC4 - 5 Days Practical Introduction to Eddy Current Testing (40 Hours)
General Theory:
- ETW4 - Half Day Refresher Course for ET Welds (4 Hours)
- ETW8 - Full Day Refresher Course for ET Welds (8 Hours)
- ETW40 - 5 Days Course for ET Welds suitable for PCN/SNT Level 1 (40 Hours)
- ETW80 - 10 Days Course for ET Welds suitable for PCN/SNT Level 2 Direct (80 Hours)
Wrought Products (Forgings) Specific
- ETWP4 - Half Day Refresher Course for ET Forgings (4 Hours)
- ETWP8 - Full Day Refresher Course for ET Forgings (8 Hours)
- ETWP40 - 5 Days Course for ET Forgings suitable for PCN/SNT Level 1 (40 Hours)
- ETWP80 - 10 Days Course for ET Forgings suitable for PCN/SNT Level 2 Direct (80 Hours)
Tube Testing Specific
- ETTT40 - 5 Days Course for ET Tube Testing suitable for SNT/PCN (40 Hours)
- ETTT80 - 10 Days Course for ET Tube Testing suitable for SNT/PCN Level 2 Direct (80 Hours)
