BGAS TRAINING
BGAS TRAINING AND CERTIFICATION
- BGAS PAINTING INSPECTOR GRADE 3/2
- BGAS SITE COATING INSPECTOR
1. BGAS PAINTING INSPECTOR GRADE 3/2
Suitable for:
Candidates with or without experience in the Painting Inspection Industry. Candidates will be assessed during the course and advised on either grade 3 or 2 exam route dependent on their progress during training.
Course Content:
Corrosion theory; surface preparation; surface contaminants and tests; paint constituents and technology; solutions and dispersions; drying and curing properties and performance; specified painting conditions; cathodic protection; holiday/pinhole detection; paint-application methods; paint/paint film testing; paint identification; metal coatings; paint faults; colour; inspection methods; specification requirements; health and safety and working practices.
Course Objectives:
- To recognise and identify the benefits/disadvantages of paint systems
- To understand the importance of surface preparation
- To understand methods of application and testing
- To understand paint system inspections
- To interpret requirements of standards
- To meet the syllabus requirements for the BGAS Painting Inspector Examination.
Additional Information:
Candidates MUST bring:
- 2 passport sized photographs.
- a valid eyesight certificate from a doctor or an optician showing satisfactory eyesight for near vision, permitting reading a minimum of Times Roman N4, or equivalent type and size letters, at not less than 300mm on a standard test chart for near vision, in at least one eye, corrected or uncorrected. Candidates for the painting inspector will be required to have had a colour perception assessment by the Ishihara 24 plate test or an equivalent.
- a completed application form and full examination fee
NOTE:
Renewal can only be made within three months of the expiry date. Any application received after three months of the expiry cannot be considered and can only be renewed by re-examination.
If the applicant is a holder of BGAS Site Coatings Inspector Approval, it should be noted that day 1 of the syllabus will cover items which the applicant may be already conversant in and therefore attendance on this day (although strongly recommended) is entirely at their discretion. Course duration may then be only 4 days. However, should the applicant decide against attendance on this day, there will be no reduction in course fee.
Four day training course with examination on day 5, or for less experienced candidates there is the opportunity to take the examination the following week.
ENTRY REQUIREMENTS:
No formal entry qualifications required, but a knowledge of dry abrasive blast cleaning or industrial paint application techniques would be advantageous
2. BGAS SITE COATING INSPECTOR
Suitable for:
Candidates with or without previous experience in site coatings inspection wishing to attain BGAS Approval as a Site Coatings Inspector.
Suitable for individuals engaged in the inspection and coating of new and existing pipelines. This approval is very useful to welding inspectors as it can extend their working time capability on pipelines projects.
Course Content:
Corrosion, specified coating conditions; surface preparation methods and standards; surface contaminants and tests for detection; coating technology; film thickness; coal tar enamels; special situations; hot applied tapes; cold applied laminate tapes; grease based tapes; self-adhesive overwrap tapes; polyethylene cladding; fillers, mastics and putties; heat shrinkable plastics; powder coatings; urethane MCLs; holiday detection; concrete coatings; internal coatings; cathodic protection; stages of pipeline construction; handling, transport and storage; pipeline surveys, health and safety; coating faults; working practices and quality.
Course Objectives:
- To understand the principles of pipeline coatings
- To understand the importance of surface preparation
- To appreciate the difficulties associated with pipeline site coating
- To understand the practical methods of testing and inspection
- To interpret the requirements of standards
- To meet the syllabus requirements for the BGAS Site Coatings Inspector examination
Additional Information:
Candidates MUST bring:
- 2 passport sized photographs
- a valid eyesight certificate from a doctor or an optician showing satisfactory eyesight for near vision, permitting reading a minimum of Times Roman N4, or equivalent type and size letters, at not less than 300mm on a standard test chart for near vision, in at least one eye, corrected or uncorrected. Candidates for the painting inspector will be required to have had a colour perception assessment by the Ishihara 24 plate test or an equivalent.
- a completed application form and full examination fee
NOTE:
Renewal can only be made within three months of the expiry date. Any application received after three months of the expiry cannot be considered and can only be renewed by re-examination.
If the applicant is a holder of BGAS Paint Inspector Approval, it should be noted that day 1 of the syllabus will cover items which the applicant may be already conversant in and therefore attendance on these days (although strongly recommended) is entirely at their discretion. Course duration may then be only 4 days. However, should the applicant decide against attendance on this day, there will be no reduction in course fee.
Four day training course with examinations on day 5, or for less experienced candidates there is the opportunity to take the examination the following week.
ENTRY REQUIREMENTS:
No formal entry qualifications required, but a knowledge of pipeline fabrication techniques, safe working practices, and a general understanding of coating application would be advantageous.
ADDRESS :
- bgas training training center in trichy :
- sri gem plaza
no.3, 4th floor,
sankaran pillai street,
s.r.c.college road,
chathiram bus stand,
trichy - 620 002
tamil nadu , india.
contact : jenifer : 093845 77677, 93810 77677
contact : suganya : 093825 88890
email : twggroupchennai@gmail.com
- bgas training institute in mumbai :
- crescent business square" room no.810,
kherani road,opposite - sj studios
sakinaka metro junction,
andheri (east)
mumbai - 400 059.
cell : 093810 48884, 073580 27788, 093810 77677
email : twggroupmumbai@gmail.com
email : twggroupchennai@gmail.com
- bgas training institute in chennai :
- no.5, boopathy street,
virugambakkam,
virugambakkam - bus stop opposite
chennai , tamil nadu , india.
tel: 044 - 420 77677, 044 - 430 72173
cell : 093845 77677
email : twggroupchennai@gmail.com
- bgas training institute in coimbatore :
- dheepam complex
no.574 to 581, 100 feet road,
near g.p.signal,
landmark: kalyan jewellery
gandhipuram
coimbatore - 641 012 .
tamil nadu , india.
contact : jasmine : 093810 77677, 093845 77677,
contact : sandhiya : 093825 88890
email : twggroupchennai@gmail.com
- bgas training institute in vizag :
- twg group vizag
no. 8 - 12 - 1/1, iind floor, gayathri nilay, gokul nagar,
beside varun motors karur vysya bank back side
opposite - holy cross church, old gajuwaka junction,
vishakapatnam - 530 026.
andhra pradesh , india.
contact : 073580 27788,
093810 48884, 76692 48884.
email : twggroupchennai@gmail.com
- bgas training institute in bangalore :
- twg group bangalore
contact : shopia : 076679 78887
contact : office : 093810 48884
email : twggroupchennai@gmail.com
- bgas training institute in hyderabad :
- twg group hyderabad
contact : shopia : 076679 78887
contact : office : 093810 48884
email : twggroupchennai@gmail.com
- bgas training institute in delhi :
- twg group delhi
contact : shopia : 076679 78887
contact : office : 093810 48884
email : twggroupchennai@gmail.com
- bgas training institute in pune :
- twg group pune
contact : shopia : 076679 78887
contact : office : 093810 48884
email : twggroupchennai@gmail.com
- bgas training training center in trivandrum :
- twg group trivandrum
contact : shopia : 076679 78887
contact : office : 093810 48884
email : twggroupchennai@gmail.com
- bgas training institute in cochin :
- twg group cochin
Palarivattom,Cochin,kerala,india - 682 025.contact :Cell : 073580 27788, 093810 48884,
email : Email : twggroupmumbai@gmail.com
